Top 10 Best Sliding Miter Saws Under 200 Based On User Rating

Last Update:

Our team studied on 44181 reviews available online for Sliding Miter Saws Under 200, chose the finest ones and prepared Sliding Miter Saws Under 200 Reviews for you. It was very difficult to shortlist the ideal Sliding Miter Saws Under 200 from thousands of products online. However, We tried to make sure that you get only the Best Sliding Miter Saws Under 200 from our suggestions. Check our listings-:

Best Sliding Miter Saws Under 200
NoProductScoreAction
1Oshlun LG-M01 Miter and Portable Saw Laser Guide9.6Shop Now on Amazon
2DEWALT Miter Saw, Single Bevel9.4Shop Now on Amazon
3CMT 253.072.12 ITK Industrial Finish Sliding Compound Miter Saw Blade9.2Shop Now on Amazon
4Hitachi C10FCG 15-Amp 10" Single Bevel Compound Miter Saw9.2Shop Now on Amazon
5Metabo HPT 10-Inch Compound Miter Saw9Shop Now on Amazon
6WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws9Shop Now on Amazon
7DEWALT 12-Inch Miter Saw8.4Shop Now on Amazon
8WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets8.2Shop Now on Amazon
9Freud 10" x 60T Thin Kerf Sliding Compound Miter Saw Blade (LU91R010)8.2Shop Now on Amazon
10Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops8.2Shop Now on Amazon

Sliding Miter Saws Under 200 Reviews

We’ve scanned 44181 reviews for you. If you are looking for the Sliding Miter Saws Under 200 than this review article may help you.

Table Of Content:

1. Oshlun LG-M01 Miter and Portable Saw Laser Guide

  • Fits most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws
  • New recessed laser design to protect the laser from hitting the material on deep cuts
  • New thinner design to fit more saws
  • New brighter and more accurate laser line
  • Includes extra set of LR44 batteries

2. DEWALT Miter Saw

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops
  • The mitre saw has a precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically
  • Bevels 0 degree – 48degree to the left and 0 degree- 3degree to the right
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.

3. CMT 253.072.12 ITK Industrial Finish Sliding Compound Miter Saw Blade

  • For fine finish crosscuts. Glass-smooth finish on your miter cuts
  • To be used on compound miter saws for cutting soft/hardwood, plywood and two-sided laminates
  • 0.110 kerf thickness, 0.087 plate thickness, 7° Hook Angle, 1 Flat + 2/15° alternate teeth Grind
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design

4. Hitachi C10FCG 15-Amp 10″ Single Bevel Compound Miter Saw

  • 0-52 degree miter angle range to the right & left for increased flexibility
  • 0-45 degree bevel range to the left to provide clean and accurate bevel cuts.
  • 2 lbs to facilitate maneuverability and easier transport.
  • 15 Amp motor delivers high power for the toughest cutting jobs.
  • Miter ranges – left 52, right 52

5. Metabo HPT 10-Inch Compound Miter Saw

  • 10″ Compound Miter Saw
  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM.
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece
  • THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments
  • HORIZONTAL HANDLE: For a secure hold
  • WARRANTY: Covered by Metabo HPT’s Professional 5-Year Tool Warranty

6. WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
  • Designed with 80 carbide-tipped teeth for fine-finish wood cutting
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

7. DEWALT 12-Inch Miter Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
  • The mitre saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 degree – 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.

8. WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets

  • Universal design fits nearly every miter saw on the market, including all WEN miter saws
  • Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage.
  • Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
  • Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long
  • Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty.

9. Freud 10″ x 60T Thin Kerf Sliding Compound Miter Saw Blade (LU91R010)

  • 10″ Blade Diameter, 60 Teeth, ATB Grind, 5/8″ Arbor, .090″ Kerf, -5° Hook Angle
  • Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Negative Hook Angles minimizes climbing for better control
  • Thin Kerf requires less power and allows for faster feed rate
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

10. Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops

  • Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!
  • Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!.
  • Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!.
  • Electric brake stops the blade in seconds and Arbor lock for quick blade changes
  • Includes: 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser.
  • Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles.
  • Arbor lock for quick blade changes
  • Die cast aluminum base for portability and better accuracy
  • 9 Positive detent miter stops lock firmly in place for faster setup and accurate cuts!
  • Max Cutting Capacity: @45°x45°: H 1-3/8” x W3-5/16”

Sliding Miter Saws Under 200 Buying Guide


Does the thought of finding a great Sliding Miter Saws Under 200 stress you out? Has your mind been juggling between choices when it comes to buying Sliding Miter Saws Under 200 in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Sliding Miter Saws Under 200 for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Sliding Miter Saws Under 200 Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Sliding Miter Saws Under 200 in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Sliding Miter Saws Under 200 currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Sliding Miter Saws Under 200 brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Sliding Miter Saws Under 200 based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Sliding Miter Saws Under 200 before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Sliding Miter Saws Under 200 they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Sliding Miter Saws Under 200, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Sliding Miter Saws Under 200 before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Sliding Miter Saws Under 200 will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Sliding Miter Saws Under 200 if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Sliding Miter Saws Under 200 on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Sliding Miter Saws Under 200 on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Sliding Miter Saws Under 200 featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment